<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"><channel><title>3D Printeray</title><description>Model-by-model 3D printer upgrade guides: stock temperature limits, firmware caps, warranties and upgrade paths, from hotends and enclosures to chamber heaters.</description><link>https://3dprinteray.com</link><item><title>Bambu Lab AMS shows offline: causes and fixes</title><link>https://3dprinteray.com/bambu-ams-offline</link><guid isPermaLink="true">https://3dprinteray.com/bambu-ams-offline</guid><description>A Bambu Lab AMS shows offline when the printer loses it on the bus cable. Reseat the 4-pin and 6-pin cables, update AMS firmware, then test with a multimeter.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Is Bambu Lab&apos;s cloud down? How to check and keep printing</title><link>https://3dprinteray.com/bambu-cloud-down</link><guid isPermaLink="true">https://3dprinteray.com/bambu-cloud-down</guid><description>Check status.bambulab.com for Bambu Lab cloud outages. If cloud printing is down, print from a microSD card or USB drive, or switch to LAN Only mode.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab Developer Mode: what it is and how to enable it</title><link>https://3dprinteray.com/bambu-developer-mode</link><guid isPermaLink="true">https://3dprinteray.com/bambu-developer-mode</guid><description>Bambu Lab Developer Mode is a LAN Only switch that lets OrcaSlicer or Home Assistant control the printer without authorization. How to enable it, by model.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Does Bambu Handy work in LAN mode? Apps that do</title><link>https://3dprinteray.com/bambu-handy-lan-mode</link><guid isPermaLink="true">https://3dprinteray.com/bambu-handy-lan-mode</guid><description>No. Bambu Handy needs Bambu&apos;s cloud and stops working in LAN Only mode. Bambu Studio, Home Assistant, Bambuddy and SimplyPrint work over LAN instead.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab printers in Home Assistant: setup and dashboards</title><link>https://3dprinteray.com/bambu-home-assistant</link><guid isPermaLink="true">https://3dprinteray.com/bambu-home-assistant</guid><description>Add a Bambu Lab printer to Home Assistant with the community Bambu Lab integration: cloud or LAN setup, Developer Mode, login errors, cards and alerts.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab camera in LAN mode: live view and streams</title><link>https://3dprinteray.com/bambu-lan-mode-camera</link><guid isPermaLink="true">https://3dprinteray.com/bambu-lan-mode-camera</guid><description>Bambu Lab cameras work in LAN mode. X1, P2S and H2 printers need LAN mode liveview on (RTSPS, port 322); P1 and A1 send JPEG frames on port 6000.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab LAN mode vs cloud mode: what changes</title><link>https://3dprinteray.com/bambu-lan-mode-vs-cloud</link><guid isPermaLink="true">https://3dprinteray.com/bambu-lan-mode-vs-cloud</guid><description>Bambu Lab LAN Only mode keeps prints on your network but drops Bambu Handy, remote printing and print history. Developer Mode adds third-party control.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>How to update a Bambu Lab printer&apos;s firmware offline</title><link>https://3dprinteray.com/bambu-offline-firmware-update</link><guid isPermaLink="true">https://3dprinteray.com/bambu-offline-firmware-update</guid><description>Copy Bambu Lab&apos;s .zip package, unchanged, to a FAT32 microSD card or USB drive, then pick Settings &gt; Firmware &gt; Update Offline. Steps for every model and AMS.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab printer shows offline: causes and fixes</title><link>https://3dprinteray.com/bambu-printer-offline</link><guid isPermaLink="true">https://3dprinteray.com/bambu-printer-offline</guid><description>A Bambu printer shows offline when it loses Bambu Cloud, even on working Wi-Fi. Check LAN Only mode, account and region, the status page, signal and port 8883.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Does Bambu Studio work offline? Slicing without internet</title><link>https://3dprinteray.com/bambu-studio-offline</link><guid isPermaLink="true">https://3dprinteray.com/bambu-studio-offline</guid><description>Yes. Bambu Studio slices with no login or internet. Print from a microSD card, or over LAN once the Bambu Network plug-in is installed, which needs internet.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Offline 3D printing: running a printer without the cloud</title><link>https://3dprinteray.com/offline-3d-printing</link><guid isPermaLink="true">https://3dprinteray.com/offline-3d-printing</guid><description>Most 3D printers print with no internet from a memory card or USB drive. The cloud adds phone apps and remote control; every major brand has a local route.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>PrusaLink in Home Assistant: setup and what it shows</title><link>https://3dprinteray.com/prusalink-home-assistant</link><guid isPermaLink="true">https://3dprinteray.com/prusalink-home-assistant</guid><description>Add a Prusa to Home Assistant with the built-in PrusaLink integration: IP address, user maker, PrusaLink password. Its camera is the print thumbnail, not video.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>PrusaLink default username, password and API key</title><link>https://3dprinteray.com/prusalink-password</link><guid isPermaLink="true">https://3dprinteray.com/prusalink-password</guid><description>PrusaLink&apos;s username is maker; the password is on the printer under Settings &gt; Network &gt; PrusaLink and doubles as the API key. How to change or reset it.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>PrusaLink on a Raspberry Pi for the MK3S and MK2.5S</title><link>https://3dprinteray.com/prusalink-raspberry-pi</link><guid isPermaLink="true">https://3dprinteray.com/prusalink-raspberry-pi</guid><description>Run PrusaLink on a Pi Zero W or Zero 2 W on the MK3S Einsy board, or a Pi 3, 4 or 5 over USB: flash Prusa&apos;s image, set RPi port, run the wizard.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>PrusaLink setup: connect a Prusa printer on your network</title><link>https://3dprinteray.com/prusalink-setup</link><guid isPermaLink="true">https://3dprinteray.com/prusalink-setup</guid><description>Set up PrusaLink on a Prusa MK4, CORE One, XL or MINI: join 2.4 GHz Wi-Fi or Ethernet, read the IPv4 address, log in, then send G-code from PrusaSlicer.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>PrusaLink vs OctoPrint for Prusa printers</title><link>https://3dprinteray.com/prusalink-vs-octoprint</link><guid isPermaLink="true">https://3dprinteray.com/prusalink-vs-octoprint</guid><description>PrusaLink is built into the Prusa MK4, Core One and XL. OctoPrint needs a Raspberry Pi on USB and plain G-code, but adds plugins and timelapses.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>PrusaLink vs Prusa Connect: local vs cloud control</title><link>https://3dprinteray.com/prusalink-vs-prusa-connect</link><guid isPermaLink="true">https://3dprinteray.com/prusalink-vs-prusa-connect</guid><description>PrusaLink is the printer&apos;s local web interface and works without internet. Prusa Connect is Prusa&apos;s cloud service for remote control, cameras and alerts.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate></item><item><title>What is a BMG extruder? Gear ratio, clones and setups</title><link>https://3dprinteray.com/bmg-extruder</link><guid isPermaLink="true">https://3dprinteray.com/bmg-extruder</guid><description>A BMG is the Bondtech Mini Geared: a dual-drive extruder with 3:1 gearing (exactly 50:17), 75 g without motor per Bondtech, for Bowden or direct drive use.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>BMG extruder settings: steps per mm and rotation distance</title><link>https://3dprinteray.com/bmg-extruder-settings</link><guid isPermaLink="true">https://3dprinteray.com/bmg-extruder-settings</guid><description>Bondtech BMG settings: 415 steps/mm at 16 microsteps, Klipper rotation_distance 7.711 (22.679 with gear_ratio 50:17), 0.8 mm direct drive retraction.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Creality K1 extruder upgrades compared</title><link>https://3dprinteray.com/creality-k1-extruder-upgrade</link><guid isPermaLink="true">https://3dprinteray.com/creality-k1-extruder-upgrade</guid><description>K1, K1C and K1 Max extruder upgrades from $3.89 gears to the $249 Bondtech LGX Lite Pro kit: Creality&apos;s spare, Phaetus DXC, Orbiter-based Libra, root needs.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Creality Sprite extruder: Pro vs SE, fit and settings</title><link>https://3dprinteray.com/creality-sprite-extruder</link><guid isPermaLink="true">https://3dprinteray.com/creality-sprite-extruder</guid><description>Sprite Extruder SE ($18, no hotend) vs Sprite Pro (300 °C all-metal hotend): which Creality printers each fits, E-steps 424.9, and 0.8 to 2 mm retraction.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>What is a direct drive extruder? Pros, cons and printers</title><link>https://3dprinteray.com/direct-drive-extruder</link><guid isPermaLink="true">https://3dprinteray.com/direct-drive-extruder</guid><description>A direct drive extruder puts its motor and drive gears on the print head, feeding the hotend directly. It handles TPU and retracts under 2 mm.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>What is a dual gear extruder, and is it worth it?</title><link>https://3dprinteray.com/dual-gear-extruder</link><guid isPermaLink="true">https://3dprinteray.com/dual-gear-extruder</guid><description>A dual gear extruder grips filament with two toothed gears, not one gear and a bearing. Bowden or direct drive; Ender 3 Bowden kits cost $19.99 to $47.50.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Ender 3 extruder upgrade: options, install and e-steps</title><link>https://3dprinteray.com/ender-3-extruder-upgrade</link><guid isPermaLink="true">https://3dprinteray.com/ender-3-extruder-upgrade</guid><description>Replace the Ender 3&apos;s plastic extruder with a metal single-gear, dual-gear or BMG-type unit, then change the E-steps from 93 to 130, 140 or 415.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Extruder upgrades: direct drive, dual gear and geared kits</title><link>https://3dprinteray.com/extruder-upgrades</link><guid isPermaLink="true">https://3dprinteray.com/extruder-upgrades</guid><description>A direct drive extruder upgrade moves the extruder onto the print head for TPU and 1 mm retraction. Upgrade types, kits from $18 and the E-steps each needs.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Micro Swiss NG direct drive extruder: fit and settings</title><link>https://3dprinteray.com/micro-swiss-ng-extruder</link><guid isPermaLink="true">https://3dprinteray.com/micro-swiss-ng-extruder</guid><description>The Micro Swiss NG is a $119.95 direct drive kit with its own LDO motor and all-metal hotend. Set 400 E-steps (Klipper: 8) and 1.0 mm retraction.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Orbiter extruder v2.0 vs v2.5: weight, gearing, sensor</title><link>https://3dprinteray.com/orbiter-extruder</link><guid isPermaLink="true">https://3dprinteray.com/orbiter-extruder</guid><description>The LDO Orbiter v2.0 and v2.5 weigh about 135 g, gear 7.5:1 and run LDO&apos;s 36 mm pancake motor at 690 steps/mm. The v2.5 adds a knurled shaft and new gears.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Orbiter extruder Klipper config: rotation distance, current</title><link>https://3dprinteray.com/orbiter-extruder-klipper-config</link><guid isPermaLink="true">https://3dprinteray.com/orbiter-extruder-klipper-config</guid><description>Orbiter v2.0 and v2.5 Klipper settings: rotation_distance 4.69 (LDO: 4.637), run_current 0.85 A, stealthChop off, 1 to 1.5 mm retraction at 120 mm/s.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Sherpa Mini extruder: weight, gear ratio, motor and build</title><link>https://3dprinteray.com/sherpa-mini-extruder</link><guid isPermaLink="true">https://3dprinteray.com/sherpa-mini-extruder</guid><description>Annex Engineering&apos;s Sherpa Mini: four printed parts, Bondtech dual drive gears and a 36 mm NEMA 14 motor geared 50:10 or 50:8. BOM, build, kits and mounts.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Sherpa Mini Klipper config: rotation distance and current</title><link>https://3dprinteray.com/sherpa-mini-klipper-config</link><guid isPermaLink="true">https://3dprinteray.com/sherpa-mini-klipper-config</guid><description>Sherpa Mini in Klipper: rotation_distance 22.67895 with gear_ratio 50:8 (3.629 without), 16 microsteps, 0.30 A run current and 0.4 mm retraction.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Sherpa Mini vs Orbiter and other light extruders compared</title><link>https://3dprinteray.com/sherpa-mini-vs-orbiter</link><guid isPermaLink="true">https://3dprinteray.com/sherpa-mini-vs-orbiter</guid><description>Sherpa Mini vs LDO Orbiter v2: both run a 36 mm NEMA 14 motor. The Orbiter is 7.5:1 and about 135 g; Annex publishes no Sherpa Mini weight. Specs and prices.</description><pubDate>Wed, 04 Nov 2026 00:00:00 GMT</pubDate></item><item><title>Printing PLA with an all-metal hotend without clogs</title><link>https://3dprinteray.com/all-metal-hotend-pla</link><guid isPermaLink="true">https://3dprinteray.com/all-metal-hotend-pla</guid><description>Yes, PLA prints in an all-metal hotend. Clogs come from heat creep; full heatsink cooling, short retraction, steady flow and a cool enclosure prevent them.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>All-metal hotend retraction settings</title><link>https://3dprinteray.com/all-metal-hotend-retraction</link><guid isPermaLink="true">https://3dprinteray.com/all-metal-hotend-retraction</guid><description>Start an all-metal hotend at 0.5 to 1 mm retraction on direct drive or 2 to 3.5 mm on Bowden, at 30 to 35 mm/s, then tune it with a retraction tower.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab hotend on an Ender 3 or Voron: wiring and config</title><link>https://3dprinteray.com/bambu-hotend-on-ender-3</link><guid isPermaLink="true">https://3dprinteray.com/bambu-hotend-on-ender-3</guid><description>Yes: a printed mount, 24 V wiring for its 48 W heater, a thermistor setting you verify (Bambu Lab publishes no curve) and a PID tune.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab hotend types: which hotend each printer uses</title><link>https://3dprinteray.com/bambu-hotend-types</link><guid isPermaLink="true">https://3dprinteray.com/bambu-hotend-types</guid><description>Bambu Lab uses four hotend families: X1/P1, A series, H2/P2S/X2D and H2C induction. What each printer ships with, which hotends fit it and its max temperature.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab hotend upgrades by printer series</title><link>https://3dprinteray.com/bambu-hotend-upgrade</link><guid isPermaLink="true">https://3dprinteray.com/bambu-hotend-upgrade</guid><description>Bambu Lab hotend upgrades by series from Bambu Lab, E3D, Micro Swiss, Phaetus, BIQU and Slice: what each changes, rated flow and rated temperature.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab H2C induction hotend explained</title><link>https://3dprinteray.com/bambu-induction-hotend</link><guid isPermaLink="true">https://3dprinteray.com/bambu-induction-hotend</guid><description>The Bambu Lab H2C heats its Vortek hotends with a coil in the toolhead, with no wires, and swaps up to six from a rack. Each combo ships with eight hotends.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Creality K1 hotend upgrades: Unicorn and alternatives</title><link>https://3dprinteray.com/creality-k1-hotend-upgrade</link><guid isPermaLink="true">https://3dprinteray.com/creality-k1-hotend-upgrade</guid><description>K1, K1C and K1 Max hotend upgrades: Creality&apos;s Unicorn nozzle kit and ceramic kits, E3D and Phaetus nozzles, the Micro Swiss FlowTech. All stop at 300 °C.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>E3D Revo hotend: max temp, thermistor, flow and nozzles</title><link>https://3dprinteray.com/e3d-revo</link><guid isPermaLink="true">https://3dprinteray.com/e3d-revo</guid><description>The E3D Revo is rated to 300 °C on a Semitec 104NT thermistor (Klipper: ATC Semitec 104NT-4-R025H42G). A 0.4 mm brass nozzle flows 13 mm³/s in PLA.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>E3D Revo vs Phaetus Rapido, Dragon and Mosquito</title><link>https://3dprinteray.com/e3d-revo-vs-rapido</link><guid isPermaLink="true">https://3dprinteray.com/e3d-revo-vs-rapido</guid><description>E3D Revo: 300 °C stock, 40 or 60 W HeaterCore, Revo-only nozzles. Rapido, Dragon and Mosquito: V6-thread nozzles, 350 to 500 °C. Specs and flow tests.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>E3D Revo vs V6: differences, fit and specs</title><link>https://3dprinteray.com/e3d-revo-vs-v6</link><guid isPermaLink="true">https://3dprinteray.com/e3d-revo-vs-v6</guid><description>The E3D Revo swaps nozzles by hand, cold; the V6 nozzle is hot-tightened. Both run 300 °C stock, and the Revo Six drops into any V6 groove mount.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Ender 3 hotend specs: voltage, wattage, thermistor, max temp</title><link>https://3dprinteray.com/ender-3-hotend-specs</link><guid isPermaLink="true">https://3dprinteray.com/ender-3-hotend-specs</guid><description>Ender 3, Pro and V2 hotend: 24 V, 40 W heater, 100k NTC thermistor (Marlin sensor 1), MK8 M6 nozzle, PTFE liner and a 260 °C firmware cap.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Ender 3 hotend upgrades compared</title><link>https://3dprinteray.com/ender-3-hotend-upgrade</link><guid isPermaLink="true">https://3dprinteray.com/ender-3-hotend-upgrade</guid><description>Ender 3 hotend upgrades: Micro Swiss all-metal kits, E3D Revo, V6 and Dragon hotends, Creality&apos;s Sprite kit. Fit by model, max temp and firmware needs.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Hotend silicone socks: what they do and their limits</title><link>https://3dprinteray.com/hotend-silicone-sock</link><guid isPermaLink="true">https://3dprinteray.com/hotend-silicone-sock</guid><description>A silicone sock insulates the heater block for steadier temperature and a cleaner nozzle. Makers rate socks near 300 °C, and each fits only its own hotend.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Hotend vs nozzle: what&apos;s the difference?</title><link>https://3dprinteray.com/hotend-vs-nozzle</link><guid isPermaLink="true">https://3dprinteray.com/hotend-vs-nozzle</guid><description>The nozzle is one part of the hotend, which also includes the heater block, heater, thermistor, heat break and heatsink. Which part to buy for which fault.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Which hotend for a Voron 2.4: Stealthburner options</title><link>https://3dprinteray.com/voron-hotend-options</link><guid isPermaLink="true">https://3dprinteray.com/voron-hotend-options</guid><description>Voron publishes Stealthburner parts for the E3D Revo Voron, Revo Six, V6, Phaetus Dragon, Rapido and more; Mosquito and Bambu hotends fit through mods.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Can the Bambu Lab A1 print nylon, PC, ABS or ASA?</title><link>https://3dprinteray.com/bambu-a1-engineering-filaments</link><guid isPermaLink="true">https://3dprinteray.com/bambu-a1-engineering-filaments</guid><description>The Bambu Lab A1 prints nylon, PC, ABS and ASA only as small, low-infill parts. Bambu Lab rates all four Not Recommended and advises against enclosing it.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Which Bambu Lab build plate to use for nylon and PC</title><link>https://3dprinteray.com/bambu-build-plate-for-nylon</link><guid isPermaLink="true">https://3dprinteray.com/bambu-build-plate-for-nylon</guid><description>Bambu Lab rates its Textured PEI, Engineering and Smooth PEI plates for nylon and PC, each with glue stick. Cool Plate SuperTack is not compatible with either.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Drying nylon and PC for Bambu Lab: temperatures and times</title><link>https://3dprinteray.com/bambu-filament-drying</link><guid isPermaLink="true">https://3dprinteray.com/bambu-filament-drying</guid><description>Bambu Lab dries nylon at 80 °C for 8 to 12 h and PC at 80 °C for 8 h in an oven, at 90 to 100 °C for 12 h on an enclosed printer&apos;s bed, or in an AMS HT.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab nylon settings: temperatures, plate and drying</title><link>https://3dprinteray.com/bambu-nylon-settings</link><guid isPermaLink="true">https://3dprinteray.com/bambu-nylon-settings</guid><description>Bambu Lab nylon settings from Bambu Studio&apos;s presets: 265 to 290 °C nozzle, 100 °C bed with glue stick, 10 to 30% fan, 8 mm³/s, spool dried at 80 °C.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Printing PA-CF on a Bambu Lab printer without clogging</title><link>https://3dprinteray.com/bambu-pa-cf-clogging</link><guid isPermaLink="true">https://3dprinteray.com/bambu-pa-cf-clogging</guid><description>PA-CF clogs on Bambu Lab printers come from fiber buildup, small or worn nozzles and wet spools. Use a 0.6 mm hardened nozzle, dry at 80 °C, keep to 8 mm³/s.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Which Bambu Lab plate to use for ASA and ABS</title><link>https://3dprinteray.com/bambu-plate-for-asa</link><guid isPermaLink="true">https://3dprinteray.com/bambu-plate-for-asa</guid><description>Bambu Lab rates its Textured PEI, Engineering and Smooth PEI plates for ASA and ABS at a 90 to 100 °C bed. Glue, slicer plate type and adhesion fixes.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Which Bambu Lab printers can print nylon?</title><link>https://3dprinteray.com/bambu-printers-for-nylon</link><guid isPermaLink="true">https://3dprinteray.com/bambu-printers-for-nylon</guid><description>Every enclosed Bambu Lab printer prints nylon; filled grades need a hardened nozzle. Bambu Lab&apos;s rating per model and grade, and the chamber heat each needs.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Which Bambu Lab printers can print polycarbonate?</title><link>https://3dprinteray.com/bambu-printers-for-polycarbonate</link><guid isPermaLink="true">https://3dprinteray.com/bambu-printers-for-polycarbonate</guid><description>Bambu Lab rates PC Recommended on its enclosed P1S, P2S, X1, X2D and H2 printers and Not Recommended on the open A series and P1P. Limits and presets by model.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab X1E vs X1C for engineering materials</title><link>https://3dprinteray.com/bambu-x1e-vs-x1c</link><guid isPermaLink="true">https://3dprinteray.com/bambu-x1e-vs-x1c</guid><description>The Bambu Lab X1E adds a 320 °C nozzle, 60 °C chamber heater and HEPA filter to the X1C. Which engineering filaments each prints, and what an X1C upgrade adds.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Can the Bambu Lab P1S print TPU?</title><link>https://3dprinteray.com/can-p1s-print-tpu</link><guid isPermaLink="true">https://3dprinteray.com/can-p1s-print-tpu</guid><description>Yes. The Bambu Lab P1S prints TPU stock. TPU for AMS (68D) feeds from the AMS; TPU 95A HF, 90A and 85A feed from an external spool, and nothing below 85A.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Venting a Bambu Lab P1S for ABS: filter, fumes and exhaust</title><link>https://3dprinteray.com/p1s-abs-ventilation</link><guid isPermaLink="true">https://3dprinteray.com/p1s-abs-ventilation</guid><description>The Bambu Lab P1S has an activated carbon filter for ABS fumes but no HEPA stage. What it catches, what studies measured, and how to vent it outdoors.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>ABS warping on the Bambu Lab P1S: causes and fixes</title><link>https://3dprinteray.com/p1s-abs-warping</link><guid isPermaLink="true">https://3dprinteray.com/p1s-abs-warping</guid><description>Stop ABS and ASA warping on a Bambu Lab P1S: wash and glue the plate, run the bed at 100 °C, keep the door and lid shut, aux fan at 0%, add brim ears.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>What filaments can the Bambu Lab P1S print?</title><link>https://3dprinteray.com/what-filaments-can-p1s-print</link><guid isPermaLink="true">https://3dprinteray.com/what-filaments-can-p1s-print</guid><description>A stock Bambu Lab P1S prints PLA, PETG, TPU, ABS, ASA, PVA, nylon and PC. Fiber, glow and metal-filled filament need a hardened hotend. Resin and PEEK never.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate></item><item><title>3D printer extended warranties: maker and retailer plans</title><link>https://3dprinteray.com/3d-printer-extended-warranty</link><guid isPermaLink="true">https://3dprinteray.com/3d-printer-extended-warranty</guid><description>Micro Center, Best Buy and MatterHackers sell their own 3D printer plans; Creality, Prusa and Elegoo sell theirs. Lengths, exclusions and October 2026 prices.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>3D printer warranties by brand: length, coverage and claims</title><link>https://3dprinteray.com/3d-printer-warranty</link><guid isPermaLink="true">https://3dprinteray.com/3d-printer-warranty</guid><description>Most 3D printers have a 1-year US warranty, or 2 years for Bambu Lab from Bambu Store US. Eight brands compared: parts, extensions and claim routes.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Anycubic warranty: length, coverage and how to claim</title><link>https://3dprinteray.com/anycubic-warranty</link><guid isPermaLink="true">https://3dprinteray.com/anycubic-warranty</guid><description>Anycubic covers a complete 3D printer for 1 year from delivery, the heated bed for 6 months, the print head and extruder for 3 months, and nozzles not at all.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab extended warranty: eligibility, length and price</title><link>https://3dprinteray.com/bambu-lab-extended-warranty</link><guid isPermaLink="true">https://3dprinteray.com/bambu-lab-extended-warranty</guid><description>Bambu Lab sells no extended warranty in the US. Its one-year Extended Warranty Service is sold only through its Canadian, European and Australian stores.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab hotend warranty: which parts, and for how long</title><link>https://3dprinteray.com/bambu-lab-hotend-warranty</link><guid isPermaLink="true">https://3dprinteray.com/bambu-lab-hotend-warranty</guid><description>Bambu Lab gives the hotend and nozzle no warranty, the extruder unit and AMS feeders 3 months, and boards, motors and AMS main units the full term.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab warranty: how long it lasts and what it covers</title><link>https://3dprinteray.com/bambu-lab-warranty</link><guid isPermaLink="true">https://3dprinteray.com/bambu-lab-warranty</guid><description>Bambu Lab printers bought from Bambu Store US or CA have a 2-year warranty, 1 year in most other countries. What it covers, 3-month parts, resellers, transfers.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to make a Bambu Lab warranty claim</title><link>https://3dprinteray.com/bambu-lab-warranty-claim</link><guid isPermaLink="true">https://3dprinteray.com/bambu-lab-warranty-claim</guid><description>File a Bambu Lab warranty claim as a support ticket at bambulab.com/support with your receipt, serial number, photos and logs. No registration is needed.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Creality warranty: length, coverage and how to claim</title><link>https://3dprinteray.com/creality-warranty</link><guid isPermaLink="true">https://3dprinteray.com/creality-warranty</guid><description>Creality printers bought in the US have a 12-month warranty (24 months in the EU), with 3 months on hotend and extruder kits and none on nozzles or plates.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Elegoo warranty: length, coverage and how to claim</title><link>https://3dprinteray.com/elegoo-warranty</link><guid isPermaLink="true">https://3dprinteray.com/elegoo-warranty</guid><description>Elegoo covers a new FDM printer for 12 months in the US and the extruder for 6 months. Nozzles, hot ends and PEI plates have no warranty. How to claim.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Flashforge warranty: length, coverage and how to claim</title><link>https://3dprinteray.com/flashforge-warranty</link><guid isPermaLink="true">https://3dprinteray.com/flashforge-warranty</guid><description>Flashforge covers a new 3D printer for 12 months in the US and its extruder, including the nozzle, for 3 months. Build plates are not covered. How to claim.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Prusa warranty: length, kits, extended cover and claims</title><link>https://3dprinteray.com/prusa-warranty</link><guid isPermaLink="true">https://3dprinteray.com/prusa-warranty</guid><description>Prusa gives US buyers a 1-year warranty on kits and assembled printers; EU consumers get 2. What a kit covers, extension prices and how to claim.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>QIDI warranty: length, coverage and how to claim</title><link>https://3dprinteray.com/qidi-warranty</link><guid isPermaLink="true">https://3dprinteray.com/qidi-warranty</guid><description>QIDI 3D printers carry a 1-year warranty from the day you receive them (up to 2 years in the EU); the hotend, nozzles, extruder and build plate get none.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Sovol warranty: length, coverage and how to claim</title><link>https://3dprinteray.com/sovol-warranty</link><guid isPermaLink="true">https://3dprinteray.com/sovol-warranty</guid><description>Sovol 3D printers carry a 1-year warranty from delivery. The extruder unit gets 3 months, accessories 1 month, and nozzles and print plates none.</description><pubDate>Fri, 23 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Upgrading a Bambu Lab A1 mini to the Combo with an AMS lite</title><link>https://3dprinteray.com/a1-mini-ams-lite</link><guid isPermaLink="true">https://3dprinteray.com/a1-mini-ams-lite</guid><description>Yes: an A1 mini plus a $199 AMS lite is the Combo. What the Combo adds, what it costs, which AMS units fit the A1 mini, and Bambu Lab&apos;s setup steps.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Which filaments work in a Bambu Lab AMS</title><link>https://3dprinteray.com/ams-compatible-filaments</link><guid isPermaLink="true">https://3dprinteray.com/ams-compatible-filaments</guid><description>Bambu Lab&apos;s AMS, AMS 2 Pro and AMS HT feed PLA, PETG, ABS, ASA, PC, nylon and dry PVA. Soft TPU and third-party fiber-filled filament are not supported.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab A1 mini upgrades: what each one changes</title><link>https://3dprinteray.com/bambu-a1-mini-upgrades</link><guid isPermaLink="true">https://3dprinteray.com/bambu-a1-mini-upgrades</guid><description>Bambu Lab A1 mini upgrades are hotends, build plates and AMS units. What each one changes, US prices, what a stock A1 mini prints, and what no upgrade fixes.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>The Bambu Lab firmware update controversy: what changed</title><link>https://3dprinteray.com/bambu-firmware-controversy</link><guid isPermaLink="true">https://3dprinteray.com/bambu-firmware-controversy</guid><description>Bambu Lab&apos;s 2025 authorization firmware blocks unapproved software from controlling its printers. What changed, what still works locally, and how to choose.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab firmware update stuck or failed: what to do</title><link>https://3dprinteray.com/bambu-firmware-update-stuck</link><guid isPermaLink="true">https://3dprinteray.com/bambu-firmware-update-stuck</guid><description>Restart and retry from the printer&apos;s screen, then check Wi-Fi, microSD card and toolhead cables. Still stuck? Install the offline package from a card or USB.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Hardened steel nozzles on Bambu Lab: models and how to fit</title><link>https://3dprinteray.com/bambu-hardened-steel-nozzle</link><guid isPermaLink="true">https://3dprinteray.com/bambu-hardened-steel-nozzle</guid><description>The X1 Carbon, X1E, P2S, X2D and H2 series ship hardened steel nozzles. The A1, A1 mini, A2L and P1S need an $11.99 to $34.99 Bambu hardened steel hotend.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab High Flow hotend vs standard and third-party</title><link>https://3dprinteray.com/bambu-high-flow-hotend</link><guid isPermaLink="true">https://3dprinteray.com/bambu-high-flow-hotend</guid><description>Bambu Lab rates its High Flow hotend at 65 mm³/s against 40 for the standard one, at $49.99 against $17.99. Fit by model, limits and third-party options.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab LAN mode not working: fixes, ports, Developer Mode</title><link>https://3dprinteray.com/bambu-lan-mode-not-working</link><guid isPermaLink="true">https://3dprinteray.com/bambu-lan-mode-not-working</guid><description>Fix Bambu LAN mode: one subnet, firewall, access code, bind by IP. Ports: TCP 8883, 990, 322 or 6000 and UDP 1990, 2021. Third-party apps need Developer Mode.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to add direct drive to an Ender 3</title><link>https://3dprinteray.com/ender-3-direct-drive</link><guid isPermaLink="true">https://3dprinteray.com/ender-3-direct-drive</guid><description>Add direct drive to an Ender 3, Pro or V2 with a printed mount or an $18 to $119.95 kit, then set the new E-steps and cut retraction to about 1 mm.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Ender 3 upgrades list: what each one fixes, costs and needs</title><link>https://3dprinteray.com/ender-3-upgrades</link><guid isPermaLink="true">https://3dprinteray.com/ender-3-upgrades</guid><description>Nine Ender 3 upgrades from $11.99 to $79.99: what each fixes on the original, Pro, V2 and Neo, its US price on October 22, 2026, and its firmware needs.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Hardened steel vs stainless steel nozzles</title><link>https://3dprinteray.com/hardened-steel-vs-stainless-nozzle</link><guid isPermaLink="true">https://3dprinteray.com/hardened-steel-vs-stainless-nozzle</guid><description>Hardened steel resists carbon and glass fiber; stainless resists corrosion but wears fast on abrasives. Both conduct heat alike. The Bambu A1 ships stainless.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to install a chamber heater in an enclosed printer</title><link>https://3dprinteray.com/install-chamber-heater</link><guid isPermaLink="true">https://3dprinteray.com/install-chamber-heater</guid><description>Mount the heater low on metal, give it a chamber sensor out of its airflow, and wire it through a fuse, a thermal cutoff and an SSR or relay rated for the load.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Signs of nozzle wear, and how to test a nozzle</title><link>https://3dprinteray.com/nozzle-wear-signs</link><guid isPermaLink="true">https://3dprinteray.com/nozzle-wear-signs</guid><description>A worn nozzle has a shorter, rounded tip and a larger or oval hole, and its prints string more and lose detail. How to test one, and how long brass lasts.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>When to use a hardened steel nozzle, filament by filament</title><link>https://3dprinteray.com/when-to-use-hardened-steel-nozzle</link><guid isPermaLink="true">https://3dprinteray.com/when-to-use-hardened-steel-nozzle</guid><description>Use a hardened steel nozzle for carbon and glass fiber, glow, metal and mineral-filled filaments. Plain PLA, PETG, ABS, ASA, TPU, PC and nylon do not need one.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Build plates that fit the Bambu Lab X1 Carbon, compared</title><link>https://3dprinteray.com/x1-carbon-build-plates</link><guid isPermaLink="true">https://3dprinteray.com/x1-carbon-build-plates</guid><description>Bambu Lab and third-party plates for the X1 Carbon&apos;s 256 mm bed, sorted by rated temperature, with US prices on October 21, 2026, and what a rating changes.</description><pubDate>Wed, 21 Oct 2026 00:00:00 GMT</pubDate></item><item><title>What the Bondtech INDX tool changer is</title><link>https://3dprinteray.com/bondtech-indx</link><guid isPermaLink="true">https://3dprinteray.com/bondtech-indx</guid><description>The Bondtech INDX is an induction toolchanger: one smart head, passive nozzle tools. How it works, printers, firmware, prices, and StealthChanger compared.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to configure Klipper for a toolchanger</title><link>https://3dprinteray.com/klipper-toolchanger-config</link><guid isPermaLink="true">https://3dprinteray.com/klipper-toolchanger-config</guid><description>Set up Klipper for a toolchanger with the klipper-toolchanger plugin: install, the [toolchanger] and [tool] sections, T0 macros, PRINT_START and removal.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How the Prusa XL tool changer works</title><link>https://3dprinteray.com/prusa-xl-toolchanger</link><guid isPermaLink="true">https://3dprinteray.com/prusa-xl-toolchanger</guid><description>The Prusa XL tool changer is a mechanical coupler that picks whole Nextruder toolheads from rear docks. It takes 1 to 5 toolheads, and you can add more later.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Fixing the Prusa XL tool changer problem error</title><link>https://3dprinteray.com/prusa-xl-toolchanger-problem</link><guid isPermaLink="true">https://3dprinteray.com/prusa-xl-toolchanger-problem</guid><description>Prusa XL error #17813, &quot;Toolchanger problem has been detected&quot;: what triggers it, how to recover the print, and the dock and offset calibrations that stop it.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Prusa XL vs Bambu Lab H2D for multi-material printing</title><link>https://3dprinteray.com/prusa-xl-vs-h2d</link><guid isPermaLink="true">https://3dprinteray.com/prusa-xl-vs-h2d</guid><description>Prusa XL+ toolchanger vs Bambu Lab H2D dual nozzle: materials without purge, prime towers, build volume, nozzle and chamber limits, and US prices.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How the Snapmaker U1 tool changer works</title><link>https://3dprinteray.com/snapmaker-u1</link><guid isPermaLink="true">https://3dprinteray.com/snapmaker-u1</guid><description>Snapmaker says the U1 swaps between four complete toolheads in about 5 seconds. How SnapSwap works, what it costs, its Klipper firmware and what you can change.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>StealthChanger: what it is, what it fits and what it costs</title><link>https://3dprinteray.com/stealthchanger</link><guid isPermaLink="true">https://3dprinteray.com/stealthchanger</guid><description>StealthChanger is DraftShift Design&apos;s open-source Voron toolchanger. The printers and toolheads it supports, what the LDO kits include and what a build costs.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to build a StealthChanger on a Voron</title><link>https://3dprinteray.com/stealthchanger-build</link><guid isPermaLink="true">https://3dprinteray.com/stealthchanger-build</guid><description>Build order for adding a StealthChanger toolchanger to a Voron 2.4: parts, shuttle, backplates, docks, top hat, umbilicals, wiring and first power-on checks.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Which Z probe to use on a StealthChanger</title><link>https://3dprinteray.com/stealthchanger-probe</link><guid isPermaLink="true">https://3dprinteray.com/stealthchanger-probe</guid><description>StealthChanger probes Z with the Tap-style OptoTap sensor on every tool. A shuttle-mounted Beacon, Cartographer or BTT Eddy also works, flagged experimental.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to fix failed tool pickups on a toolchanger</title><link>https://3dprinteray.com/toolchanger-failed-pickup</link><guid isPermaLink="true">https://3dprinteray.com/toolchanger-failed-pickup</guid><description>Fix a toolchanger that misses tools: recalibrate dock position, firm up the dock, check pins, magnets, umbilicals and tool detection, then tune pickup speed.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Which 3D printers have tool changers</title><link>https://3dprinteray.com/toolchanger-printers</link><guid isPermaLink="true">https://3dprinteray.com/toolchanger-printers</guid><description>Every toolchanger 3D printer on sale in October 2026 by US price, with toolhead count, build volume and chamber heating, plus DIY kits and upcoming models.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to slice a model for a toolchanger printer</title><link>https://3dprinteray.com/toolchanger-slicing</link><guid isPermaLink="true">https://3dprinteray.com/toolchanger-slicing</guid><description>Slice for a toolchanger in PrusaSlicer, OrcaSlicer or Snapmaker Orca: extruder setup, start G-code, ooze prevention, prime tower, nozzle sizes and materials.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to calibrate tool offsets on a toolchanger</title><link>https://3dprinteray.com/toolchanger-tool-offsets</link><guid isPermaLink="true">https://3dprinteray.com/toolchanger-tool-offsets</guid><description>Calibrate XY and Z tool offsets on a Klipper toolchanger, Prusa XL or Snapmaker U1, and see how dock calibration differs from nozzle offset calibration.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Toolchanger vs AMS: which wastes less filament</title><link>https://3dprinteray.com/toolchanger-vs-ams</link><guid isPermaLink="true">https://3dprinteray.com/toolchanger-vs-ams</guid><description>Toolchanger vs AMS-style changer: waste and time per color change from maker data, purge towers, max materials, and StealthChanger vs ERCF and Box Turtle.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How a 3D printer toolchanger works</title><link>https://3dprinteray.com/toolchangers</link><guid isPermaLink="true">https://3dprinteray.com/toolchangers</guid><description>How a 3D printer toolchanger docks, parks and picks up whole toolheads, how many toolheads each system takes, and the main printers and DIY kits.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Toolchanger options for the Voron 2.4, Trident and V0</title><link>https://3dprinteray.com/voron-toolchanger</link><guid isPermaLink="true">https://3dprinteray.com/voron-toolchanger</guid><description>Voron toolchanger options side by side: StealthChanger, TapChanger, MissChanger, MadMax and INDX, which Voron each fits, coupling, max tools and kit prices.</description><pubDate>Wed, 14 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Adding a second extruder to a single-nozzle printer</title><link>https://3dprinteray.com/add-second-extruder</link><guid isPermaLink="true">https://3dprinteray.com/add-second-extruder</guid><description>You can add a second extruder to an open Marlin or Klipper printer, but not to a closed one. Parts, mainboard, firmware and slicer setup, and the mod routes.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to assign filaments to the left and right nozzle</title><link>https://3dprinteray.com/assign-filament-left-right-nozzle</link><guid isPermaLink="true">https://3dprinteray.com/assign-filament-left-right-nozzle</guid><description>Assign filaments to the left or right nozzle in Bambu Studio (H2D, H2C, X2D) with filament grouping, or pick extruders in PrusaSlicer, OrcaSlicer and Cura.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Dual nozzle printers with a heated chamber, compared</title><link>https://3dprinteray.com/dual-nozzle-heated-chamber</link><guid isPermaLink="true">https://3dprinteray.com/dual-nozzle-heated-chamber</guid><description>Dual nozzle and IDEX 3D printers with an actively heated chamber, sorted by chamber temperature, with nozzle limits, dual print area and maker prices.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to calibrate nozzle offset on a dual nozzle printer</title><link>https://3dprinteray.com/dual-nozzle-offset-calibration</link><guid isPermaLink="true">https://3dprinteray.com/dual-nozzle-offset-calibration</guid><description>Run nozzle offset calibration on a Bambu Lab H2D or X2D, or set the second nozzle&apos;s XY and Z offset in Klipper or Marlin from a printed test.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to stop the idle nozzle oozing on a dual nozzle printer</title><link>https://3dprinteray.com/dual-nozzle-ooze</link><guid isPermaLink="true">https://3dprinteray.com/dual-nozzle-ooze</guid><description>Stop the idle nozzle oozing on a dual nozzle printer with standby temperature, toolchange retraction, a prime tower and an ooze shield, slicer by slicer.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Does a second nozzle slow down printing?</title><link>https://3dprinteray.com/dual-nozzle-print-speed</link><guid isPermaLink="true">https://3dprinteray.com/dual-nozzle-print-speed</guid><description>Bambu Studio counts 5.6 s for an H2D nozzle switch and about a minute for an AMS filament change. Here is what a second nozzle does to print time.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>What a dual nozzle 3D printer is and what it is for</title><link>https://3dprinteray.com/dual-nozzle-printing</link><guid isPermaLink="true">https://3dprinteray.com/dual-nozzle-printing</guid><description>A dual nozzle 3D printer has two hotends on one toolhead. What it prints, how it compares with an AMS or MMU, and which printers have one, with prices.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Do dual nozzle printers waste less filament?</title><link>https://3dprinteray.com/dual-nozzle-purge-waste</link><guid isPermaLink="true">https://3dprinteray.com/dual-nozzle-purge-waste</guid><description>How much less filament a dual-nozzle printer wastes than a single nozzle with an AMS, when it saves nothing, and slicer settings that cut purge waste further.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>What the Bambu Lab Filament Track Switch does</title><link>https://3dprinteray.com/filament-track-switch</link><guid isPermaLink="true">https://3dprinteray.com/filament-track-switch</guid><description>What Bambu Lab&apos;s Filament Track Switch is: how it lets any AMS slot feed either nozzle on the X2D, H2D and H2C, plus price, firmware, setup and limits.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How the Bambu Lab H2D dual nozzle works</title><link>https://3dprinteray.com/h2d-dual-nozzle</link><guid isPermaLink="true">https://3dprinteray.com/h2d-dual-nozzle</guid><description>How the Bambu Lab H2D&apos;s two nozzles work: the lifting left hotend, flow blocker, which AMS feeds which nozzle, filament grouping and what the H2D Pro changes.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>H2D print volume with one nozzle and with both</title><link>https://3dprinteray.com/h2d-dual-nozzle-print-volume</link><guid isPermaLink="true">https://3dprinteray.com/h2d-dual-nozzle-print-volume</guid><description>Bambu Lab H2D build volume per nozzle: 325 × 320 mm for either alone, 300 × 320 mm shared by both, 350 mm combined, and the 320 mm left-nozzle height cap.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Running two different nozzle sizes on the H2D</title><link>https://3dprinteray.com/h2d-two-nozzle-sizes</link><guid isPermaLink="true">https://3dprinteray.com/h2d-two-nozzle-sizes</guid><description>Whether the Bambu Lab H2D can print with a different nozzle size on each side, which sizes and types it takes, and what to do instead for fast infill.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab H2D vs X2D: the dual nozzle differences</title><link>https://3dprinteray.com/h2d-vs-x2d</link><guid isPermaLink="true">https://3dprinteray.com/h2d-vs-x2d</guid><description>Bambu Lab H2D vs X2D side by side: nozzle design, 350 vs 300 °C, build volume per nozzle, filament limits per nozzle, AMS, laser and US list price.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Does the Bambu Lab H2S have a dual nozzle?</title><link>https://3dprinteray.com/h2s-dual-nozzle</link><guid isPermaLink="true">https://3dprinteray.com/h2s-dual-nozzle</guid><description>No. The Bambu Lab H2S has one hotend. The only official route to two nozzles is the $899 Vortek kit, which converts the printer into an H2C.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to print PLA with PVA supports on a dual nozzle printer</title><link>https://3dprinteray.com/pva-supports-dual-nozzle</link><guid isPermaLink="true">https://3dprinteray.com/pva-supports-dual-nozzle</guid><description>Set up soluble PVA supports for PLA on a Bambu Lab H2D or X2D: which nozzle gets PVA, Bambu Studio settings, drying, dissolving and a support material table.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to combine TPU and PETG in one print</title><link>https://3dprinteray.com/tpu-petg-one-print</link><guid isPermaLink="true">https://3dprinteray.com/tpu-petg-one-print</guid><description>Print TPU and PETG in one part: TPU in its own nozzle, both bodies in one object, beam interlocking on, the bed set for the first layer and dry filament.</description><pubDate>Mon, 12 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to add macros to Klipper</title><link>https://3dprinteray.com/add-klipper-macros</link><guid isPermaLink="true">https://3dprinteray.com/add-klipper-macros</guid><description>Add a gcode_macro to Klipper in printer.cfg or an included macros.cfg, fix the missing-file error, and get macros to show as buttons in Mainsail and Fluidd.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Klipper adaptive bed meshing explained</title><link>https://3dprinteray.com/klipper-adaptive-bed-mesh</link><guid isPermaLink="true">https://3dprinteray.com/klipper-adaptive-bed-mesh</guid><description>What Klipper&apos;s adaptive bed mesh does, how to set up BED_MESH_CALIBRATE ADAPTIVE=1, OrcaSlicer and KAMP, and why it can still probe the whole bed.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to run a Klipper macro on startup</title><link>https://3dprinteray.com/klipper-delayed-gcode</link><guid isPermaLink="true">https://3dprinteray.com/klipper-delayed-gcode</guid><description>Run a Klipper macro at startup with a delayed_gcode section, load a bed mesh profile at boot, and build timers that run later, repeat or cancel.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to write a Klipper END_PRINT macro</title><link>https://3dprinteray.com/klipper-end-print-macro</link><guid isPermaLink="true">https://3dprinteray.com/klipper-end-print-macro</guid><description>A working Klipper END_PRINT macro that retracts, lifts, parks and shuts down, what each line does, how to run it on cancel, and how to fix its errors.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to enable exclude object in Klipper</title><link>https://3dprinteray.com/klipper-exclude-object</link><guid isPermaLink="true">https://3dprinteray.com/klipper-exclude-object</guid><description>Enable Klipper&apos;s exclude object with one config section and slicer labels or Moonraker processing, then cancel single parts with EXCLUDE_OBJECT or a macro.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to add M600 filament change to Klipper</title><link>https://3dprinteray.com/klipper-filament-change-macro</link><guid isPermaLink="true">https://3dprinteray.com/klipper-filament-change-macro</guid><description>A working Klipper M600 macro with LOAD_FILAMENT and UNLOAD_FILAMENT, what each line does, and how to fix &quot;Macro LOAD_FILAMENT not found&quot;.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to set up a filament runout sensor in Klipper</title><link>https://3dprinteray.com/klipper-filament-runout-sensor</link><guid isPermaLink="true">https://3dprinteray.com/klipper-filament-runout-sensor</guid><description>Add a filament runout sensor in Klipper with filament_switch_sensor, pause and park on runout, check filament before a print, and fix false triggers.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Klipper heater verification settings explained</title><link>https://3dprinteray.com/klipper-heater-verification</link><guid isPermaLink="true">https://3dprinteray.com/klipper-heater-verification</guid><description>What Klipper&apos;s verify_heater check does, its four settings and defaults, what &quot;not heating at expected rate&quot; means, and how to fix a false trip safely.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>If, else and loops in Klipper macros</title><link>https://3dprinteray.com/klipper-macro-if-else</link><guid isPermaLink="true">https://3dprinteray.com/klipper-macro-if-else</guid><description>How to write if, elif and else, for loops, math and console messages in Klipper macros, plus what to use instead of a while loop.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Klipper macro parameters: passing values and defaults</title><link>https://3dprinteray.com/klipper-macro-parameters</link><guid isPermaLink="true">https://3dprinteray.com/klipper-macro-parameters</guid><description>Pass values to a Klipper macro as NAME=VALUE, read them with params, convert them to numbers, set defaults and handle 0/1 boolean parameters.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to ask for user input in a Klipper macro</title><link>https://3dprinteray.com/klipper-macro-prompt</link><guid isPermaLink="true">https://3dprinteray.com/klipper-macro-prompt</guid><description>Show a clickable prompt from a Klipper macro with RESPOND and action:prompt commands in Mainsail or Fluidd, and make a print wait for the answer.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Klipper macro variables: storing and reading state</title><link>https://3dprinteray.com/klipper-macro-variables</link><guid isPermaLink="true">https://3dprinteray.com/klipper-macro-variables</guid><description>Declare Klipper macro variables with variable_ options, change them with SET_GCODE_VARIABLE, share them between macros and read printer state.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to make a Klipper macro wait</title><link>https://3dprinteray.com/klipper-macro-wait</link><guid isPermaLink="true">https://3dprinteray.com/klipper-macro-wait</guid><description>Make a Klipper macro wait for a temperature with M109, M190 or TEMPERATURE_WAIT, pause it for a set time with G4, or delay a command with delayed_gcode.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>What Klipper macros can do</title><link>https://3dprinteray.com/klipper-macros</link><guid isPermaLink="true">https://3dprinteray.com/klipper-macros</guid><description>What Klipper macros are, what they automate, which commands Klipper and Mainsail or Fluidd provide by default, and the macros most printers run.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to write a Klipper nozzle wipe macro</title><link>https://3dprinteray.com/klipper-nozzle-wipe-macro</link><guid isPermaLink="true">https://3dprinteray.com/klipper-nozzle-wipe-macro</guid><description>A working Klipper CLEAN_NOZZLE macro that scrubs the nozzle across a brush, how to find the brush coordinates, and where to call it in PRINT_START.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to set up PAUSE, RESUME and CANCEL_PRINT in Klipper</title><link>https://3dprinteray.com/klipper-pause-resume-macros</link><guid isPermaLink="true">https://3dprinteray.com/klipper-pause-resume-macros</guid><description>Enable pause_resume, then paste PAUSE, RESUME and CANCEL_PRINT macros that park and retract. Covers the not-defined warning and pausing at a layer.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to write a Klipper PRINT_START macro</title><link>https://3dprinteray.com/klipper-print-start-macro</link><guid isPermaLink="true">https://3dprinteray.com/klipper-print-start-macro</guid><description>Write a Klipper PRINT_START macro that takes temperatures from the slicer, heats, homes, meshes and purges, and fix the Unknown command error.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to add a purge line macro in Klipper</title><link>https://3dprinteray.com/klipper-purge-line-macro</link><guid isPermaLink="true">https://3dprinteray.com/klipper-purge-line-macro</guid><description>A Klipper purge line macro you can paste, where it goes in PRINT_START, how much to extrude, and what each purge error in the console means.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Klipper rename_existing: overriding built-in commands</title><link>https://3dprinteray.com/klipper-rename-existing</link><guid isPermaLink="true">https://3dprinteray.com/klipper-rename-existing</guid><description>How rename_existing lets a Klipper macro replace G28, M117, PAUSE or any built-in command, the naming rules, homing_override, and the errors.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to set a Z offset per build plate in Klipper</title><link>https://3dprinteray.com/klipper-z-offset-per-plate</link><guid isPermaLink="true">https://3dprinteray.com/klipper-z-offset-per-plate</guid><description>Store one Z offset per build plate with save_variables, apply it with a SET_PLATE macro and PRINT_START, and measure each plate&apos;s offset.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to add multi-color printing to an existing printer</title><link>https://3dprinteray.com/add-multi-color-printing</link><guid isPermaLink="true">https://3dprinteray.com/add-multi-color-printing</guid><description>Every way to add multi-color printing to a printer you own: manual color changes, AMS, MMU3, Klipper filament changers and toolchanger kits, with prices.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Upgrading Bambu Lab printers for engineering materials</title><link>https://3dprinteray.com/bambu-lab</link><guid isPermaLink="true">https://3dprinteray.com/bambu-lab</guid><description>What each Bambu Lab printer can print stock, where its nozzle, bed and chamber limits sit, and which upgrades help with engineering filaments.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to run a Bambu Lab printer in LAN-only mode</title><link>https://3dprinteray.com/bambu-lan-only-mode</link><guid isPermaLink="true">https://3dprinteray.com/bambu-lan-only-mode</guid><description>How to switch a Bambu Lab printer to LAN-only mode, connect Bambu Studio with the access code, update firmware offline, and what stops working.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Chamber heater options for the Bambu Lab X1C</title><link>https://3dprinteray.com/bambu-x1c-chamber-heater</link><guid isPermaLink="true">https://3dprinteray.com/bambu-x1c-chamber-heater</guid><description>Every chamber heater sold for the Bambu Lab X1C, side by side, plus Bambu Lab&apos;s position, the warranty trade-off, and how to run one without clogs.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Bambu Lab X1C upgrade path: what to change, in what order</title><link>https://3dprinteray.com/bambu-x1c-upgrade-path</link><guid isPermaLink="true">https://3dprinteray.com/bambu-x1c-upgrade-path</guid><description>What the Bambu Lab X1 Carbon prints stock, where its limits sit, and the upgrades worth making for PC, filled nylons and hotter materials, in order.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Can you add a chamber heater to a 3D printer? Your options</title><link>https://3dprinteray.com/chamber-heaters</link><guid isPermaLink="true">https://3dprinteray.com/chamber-heaters</guid><description>How chamber heater retrofits work, which materials need one, the risks to motors and electronics, and every commercial retrofit kit side by side.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Does upgrading a 3D printer void the warranty?</title><link>https://3dprinteray.com/does-upgrading-void-warranty</link><guid isPermaLink="true">https://3dprinteray.com/does-upgrading-void-warranty</guid><description>What Bambu Lab, Prusa, QIDI and Creality warranties say about upgrades, third-party parts and firmware, and what US and EU law add.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Can firmware temperature limits be raised safely?</title><link>https://3dprinteray.com/firmware-temperature-limits</link><guid isPermaLink="true">https://3dprinteray.com/firmware-temperature-limits</guid><description>When it is safe to raise a printer&apos;s firmware temperature limit, the hardware that must change first, and how to do it in Marlin and Klipper.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to choose a hotend for engineering filaments</title><link>https://3dprinteray.com/hotends-for-engineering-filaments</link><guid isPermaLink="true">https://3dprinteray.com/hotends-for-engineering-filaments</guid><description>How to pick a hotend for nylon, PC and PEEK: all-metal vs PTFE-lined, heat breaks, sensors, heaters, and every 400 to 500 °C hotend compared.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to control a chamber heater with Klipper macros</title><link>https://3dprinteray.com/klipper-chamber-heater-control</link><guid isPermaLink="true">https://3dprinteray.com/klipper-chamber-heater-control</guid><description>Set up a chamber heater in Klipper with heater_generic, add M141 and M191 macros, soak the chamber in PRINT_START, and keep heater checks on.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How multi-color 3D printing works: AMS, MMU and toolchangers</title><link>https://3dprinteray.com/multi-color-printing</link><guid isPermaLink="true">https://3dprinteray.com/multi-color-printing</guid><description>How multi-color 3D printing works with one nozzle, two nozzles, IDEX or a toolchanger, and how each handles purge waste and mixed materials.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>3D printer temperature limits: nozzle, bed and chamber</title><link>https://3dprinteray.com/temperature-limits</link><guid isPermaLink="true">https://3dprinteray.com/temperature-limits</guid><description>What caps a 3D printer&apos;s nozzle, bed and chamber temperatures, part by part, and what has to change before you can print hotter materials.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>What order should you upgrade a 3D printer in?</title><link>https://3dprinteray.com/upgrade-order</link><guid isPermaLink="true">https://3dprinteray.com/upgrade-order</guid><description>Upgrade a 3D printer in the order your next material needs: enclosure, bed, hardened nozzle, hotend, then chamber heat. With a filament-by-filament chart.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Upgrade a consumer printer or buy industrial? Costs compared</title><link>https://3dprinteray.com/upgrade-vs-industrial-printer</link><guid isPermaLink="true">https://3dprinteray.com/upgrade-vs-industrial-printer</guid><description>What it costs to upgrade a consumer 3D printer for engineering materials, against high-temperature and industrial FDM printers, with sourced prices.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Voron printers for engineering materials: builds, upgrades</title><link>https://3dprinteray.com/voron</link><guid isPermaLink="true">https://3dprinteray.com/voron</guid><description>What a Voron is, what it prints in a 50 to 60 °C chamber, where its limits sit, and which hotend and chamber upgrades fit for engineering materials.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Voron bed size and power requirements: heater and PSU</title><link>https://3dprinteray.com/voron-bed-power-planning</link><guid isPermaLink="true">https://3dprinteray.com/voron-bed-power-planning</guid><description>How to size a Voron bed heater by bed size and mains voltage: watts, current at 120 V and 240 V, SSR limits, thermal fuses and the bed plate.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Wear-resistant nozzle options: hardened steel, ruby, carbide</title><link>https://3dprinteray.com/wear-resistant-nozzles</link><guid isPermaLink="true">https://3dprinteray.com/wear-resistant-nozzles</guid><description>3D printer nozzle materials compared by wear, heat conduction and temperature limit, with which one suits abrasive and high-temperature filaments.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to calibrate z offset at printing temperature</title><link>https://3dprinteray.com/z-offset-at-temperature</link><guid isPermaLink="true">https://3dprinteray.com/z-offset-at-temperature</guid><description>Why a bed probe reads differently when the printer is hot, and how to heat soak, probe and set z offset at printing temperature in Klipper.</description><pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate></item></channel></rss>